Standard Group - Rubber Additives Manufacturer
MIAK,Nitrobenzene,Rubber additives, etc.Green and sustainable development
TEL:+86-21-6420 0566

N,N-Dimethyl Cyclohexylamine

OEM  OEM Services Provided
Feature Good stability
Classification Paint Additives
Advantage  Professional, Fast Delivery, Customizable
Samples Apply for free,Contact Export Director now ↓

CAS No. 98-94-2

Content 98%

Packing 170kg/drum

Names and Identifiers

NameN,N-Dimethylcyclohexylamine
SynonymsDMCHA
N,N-Dimethylcyclohex
Cyclohexyldimethylamine
N-Cyclohexyldimethylamine
N,N-Dimethylcyclohexanamine
N,N-diMethylcyclohaxylaMine
N,N-Dimethylcyclohexylamine
n,n-dimethyl cyclohexylamine
Cyclohexanamine,N,N-dimethyl-
Cyclohexylamine,N,N-dimethyl-
Cyclohexylamine, N,N-dimethyl-
Lupragen N100Dimethylcyclohexylamine)
N,N-Dimethylcyclohexylamine (Lupragen N100)
N-CyclohexyldimethylamineDimethylaminocyclohexane
N,N-Dimethylcyclohexylamine,(Cyclohexyldimethylamine)
N,N-Dimethylcyclohexylamine, (Cyclohexyldimethylamine)
CAS98-94-2
EINECS202-715-5
InChIInChI=1/C8H17N/c1-9(2)8-6-4-3-5-7-8/h8H,3-7H2,1-2H3
InChIKeySVYKKECYCPFKGB-UHFFFAOYSA-N

98-94-2 – Physico-chemical Properties

Molecular FormulaC8H17N
Molar Mass127.23
Density0.849 g/mL at 25 °C (lit.)
Melting Point-60 °C
Boling Point158-159 °C (lit.)
Flash Point108°F
Water Solubility10 g/L (20 ºC)
Solubility10 g/L (20°C)
Vapor Presure3.6 mm Hg ( 20 °C)
AppearanceLiquid
ColorClear
BRN1919922
pKapK1:10.72(+1) (25°C)
PH12 (5g/l, H2O, 20℃)
Storage ConditionStore below +30°C.
SensitiveAir Sensitive
Explosive Limit3.6-19%(V)
Refractive Indexn20/D 1.454(lit.)
Physical and Chemical Propertiescolorless to light yellow transparent liquid at room temperature, soluble in alcohol and ether solvents
The solubility is strongly basic tertiary amine compounds, soluble in alcohol and ether solvents, insoluble in water
freezing point <3-77 ℃
boiling range (℃) 158 – 160
specific gravity (D420) 0.8528 – 0.8606
refractive index (ND20) 1.4541 – 1.4550
UseMainly used as catalyst for rigid polyurethane foam

98-94-2 – Risk and Safety

Risk CodesR10 – Flammable
R20/21/22 – Harmful by inhalation, in contact with skin and if swallowed.
R34 – Causes burns
R50/53 – Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
R23/24 –
R22 – Harmful if swallowed
Safety DescriptionS26 – In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S28 – After contact with skin, wash immediately with plenty of soap-suds.
S36/37/39 – Wear suitable protective clothing, gloves and eye/face protection.
S45 – In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.)
S61 – Avoid release to the environment. Refer to special instructions / safety data sheets.
S28A –
S16 – Keep away from sources of ignition.
UN IDsUN 2264 8/PG 2
WGK Germany1
RTECSGX1198000
TSCAYes
HS Code29213010
Hazard Class8
Packing GroupII
ToxicityLD50 orally in Rabbit: 272 mg/kg LD50 dermal Rat > 400 mg/kg

Reference Information

freezing point<-77 ℃
LogP2.31 at 25℃
Applicationmainly used as rigid polyurethane foam catalyst
N,N-dimethylcyclohexylamine can be used in a wide range of rigid foams. One of the main applications is insulating foam, including formulations for sprays, plates, laminates and refrigeration. N,N-dimethylcyclohexylamine is also suitable for the manufacture of rigid foam furniture frames and decorative parts. The catalyst is used in the hard foam product, and can be used alone as the main catalyst without adding organotin, and can also be supplemented with JD series catalysts according to the requirements of the process and products. The product is also used as an intermediate for rubber accelerators and synthetic fibers.
pharmaceutical intermediates
production method
categoryflammable liquid
toxicity gradehigh toxicity
Acute toxicityoral-rat LD50: 348 mg/kg; Oral-mouse LD50: 320 mg/kg
flammability hazard characteristicsflammable in case of open flame, high temperature and oxidant; toxic nitric oxide gas
storage and transportation characteristicsThe warehouse is ventilated and dried at low temperature; Stored separately from oxidants and acids
extinguishing agentdry powder, dry sand, carbon dioxide, foam, 1211 extinguishing agent
Occupational Standardsel 1 mg/m3
spontaneous combustion temperature419 ° F.

Declaration: The products displayed on this website are intended exclusively for industrial applications or scientific research. They are not intended for medical, pharmaceutical, or food use. In accordance with applicable laws and regulations, purchasing organizations must hold valid qualifications and approvals.

Ready to Start?

For help with solutions customized to your business needs, contact Export Director now.

With 30+ years of experience and We firmly believe that product quality is the basis of cooperation.

Chat Now
Online Customer Service
contact

TEl

+86-21-6420 0566

WhatsApp
Service