Specifications
STD A85 Anti-slip Resin is a high-performance thermoset formulation designed for industrial and commercial flooring applications. Key parameters are summarized below:
| Parameter | Specification |
|---|---|
| Composition | Modified epoxy-silane hybrid with silica aggregates |
| Viscosity (25°C) | 10.000–15.000 cPs |
| Curing Time | 6–8 hours @ 25°C |
| Hardness (Shore D) | 80–88 |
| Slip Resistance (DIN 51130) | R13 (very high) |
| Temperature Range | -50°C to +130°C |
| Chemical Resistance | Acids, alkalis, oils, solvents, UV exposure |
| Abrasion Resistance (Taber, CS-17. 1kg) | ≤50 mg loss (1.000 cycles) |
Compliance Standards
The resin meets rigorous international safety and environmental benchmarks:
EN 13893: Slip resistance certification for pedestrian surfaces.
ASTM D2047: Static coefficient of friction ≥0.70.
OSHA 1910.22: Compliance with workplace floor safety regulations.
ISO 4628: Weathering and UV degradation resistance.
REACH/RoHS: Compliance with EU chemical regulations.
Applications
- Industrial Floors: Factories, warehouses, and loading zones.
- Transportation: Aircraft hangars, ship decks, and railway platforms.
- Public Infrastructure: Staircases, ramps, and pedestrian walkways.
- Renewable Energy: Wind turbine bases and solar panel frames.
- Healthcare: Hospital corridors and operating rooms.
Key Advantages
- Ultra-High Traction: Silica-rich surface reduces slip risks by 70% vs. conventional resins.
- Extreme Durability: Resists abrasion, impact, and chemical corrosion.
- Customizable: Tintable to match RAL/Pantone color codes.
- Eco-Friendly: Low VOC emissions (<30 g/L) and recyclable post-service life.
- Fast Installation: Self-leveling properties enable rapid application.
