Specifications
STD A100 Anti-slip Resin is a premium thermoset formulation engineered for high-traction industrial and commercial applications. Key parameters are summarized below:
| Parameter | Specification |
|---|---|
| Composition | Polyurethane-silica hybrid with ceramic aggregates |
| Viscosity (25°C) | 12.000–18.000 cPs |
| Curing Time | 8–10 hours @ 25°C |
| Hardness (Shore D) | 85–90 |
| Slip Resistance (DIN 51130) | R13 (very high) |
| Temperature Range | -55°C to +140°C |
| Chemical Resistance | Hydrocarbons, solvents, UV exposure |
| Abrasion Resistance (Taber, CS-17. 1kg) | ≤40 mg loss (1.000 cycles) |
Compliance Standards
The resin adheres to global safety and environmental benchmarks:
EN 13893: Slip resistance certification for pedestrian and industrial surfaces.
ASTM D2047: Static coefficient of friction ≥0.75.
OSHA 1910.22: Workplace floor safety compliance.
ISO 4628: UV and weathering resistance.
NSF/ANSI 61: Potable water contact safety (optional formulation).
Applications
- Industrial Floors: Heavy-duty manufacturing plants, chemical processing zones.
- Transportation: Aircraft hangars, ship decks, railway platforms.
- Public Infrastructure: Staircases, ramps, pedestrian crossings.
- Renewable Energy: Wind turbine bases, solar panel frames.
- Marine: Offshore platforms, dockyards.
Key Advantages
- Ultra-High Traction: Ceramic-reinforced surface reduces slip risks by 80% vs. conventional resins.
- Extreme Durability: Resists abrasion, impact, and chemical corrosion.
- Customizable: Tintable to RAL/Pantone codes; UV-stable finishes.
- Eco-Friendly: Low VOC emissions (<20 g/L) and recyclable post-service life.
- Fast Installation: Self-leveling properties enable rapid application.
